HomeEV IndustryEaton Battery Configuration Switch Wins 2026 EV Charging Innovation Award

Eaton Battery Configuration Switch Wins 2026 EV Charging Innovation Award

The technology enables 800-volt electric vehicles to charge from existing 400-volt DC fast chargers by reconfiguring the battery pack between 400-volt and 800-volt operation.

Eaton’s Mobility segment has received the EV Charging Innovation Excellence Award at The Battery Show North America 2026 for its Battery Configuration Switch, or BCS.

The Battery Show North America was held from October 13 to 15, 2026, in Detroit.

Eaton’s BCS enables 800-volt electric vehicles to charge at 400-volt DC fast chargers by transitioning the battery pack voltage between 400 and 800 volts.

The technology is intended to give manufacturers greater charging flexibility across existing infrastructure while reducing the need for additional power-conversion hardware.

“Receiving this award recognizes our team’s work to address a key challenge in vehicle electrification,” said Scott Adams, Senior Vice President, Technology and Global Products at Eaton’s Mobility segment.

“Our technologies help customers develop electric vehicles that charge more flexibly while maintaining high safety and reliability.”

BCS bridges 800-volt EVs and 400-volt chargers

Automakers are increasingly developing 800-volt electric vehicle architectures, while much of the existing DC fast-charging infrastructure operates at 400 volts.

Eaton developed the Battery Configuration Switch to address this voltage mismatch.

When two 400-volt battery strings are connected in series, they provide the 800-volt supply used while the vehicle is operating. The BCS can reconfigure those strings into a parallel 400-volt arrangement when the vehicle connects to compatible 400-volt DC charging equipment.

This allows an 800-volt EV to access a wider range of existing charging infrastructure while retaining the performance advantages of its higher-voltage architecture during vehicle operation.

According to Eaton’s engineering team, the battery switching function takes place before and after charging, when the battery management controller or charge controller indicates that conditions are safe. The BCS does not continuously switch between configurations during high-power charging.

Single switch replaces a multi-contactor arrangement

A reconfigurable battery pack can use three separately controlled contactors to switch its battery strings between series and parallel operation.

That approach requires the vehicle’s control system to operate the contactors in the correct sequence. Incorrect sequencing could create an unsafe battery configuration.

Eaton’s BCS replaces the multi-contactor arrangement with a single rotary-style switch that can place the battery strings in series or parallel.

The company says a mechanical interlock makes it physically impossible for the switch to short-circuit the battery during reconfiguration.

Eaton also says the design can reduce system complexity by removing contactors, busbars, fasteners and wiring associated with a conventional reconfiguration system.

Because the BCS is a latching device, it consumes power while changing positions but does not require continuous power to maintain either the series or parallel state.

Start of production targeted for 2028–2029 platforms

The Battery Configuration Switch must be integrated into the vehicle’s battery architecture and housed within a custom Battery Disconnect Unit.

According to Eaton’s engineering team, the BCS is therefore being developed primarily for future vehicle platforms rather than as a retrofit for existing EV battery packs.

Eaton is targeting start of production for model-year 2028–2029 vehicle platforms.

The company has not announced a specific automaker, production vehicle or supply contract using the technology.

MCS charge box and Breaktor receive finalist recognition

Eaton’s combined Megawatt Charging System charge box and Battery Configuration Switch was also named a finalist for the EV Charging Innovation Excellence Award.

Designed for commercial electric vehicles, the MCS charge box supports currents of up to 2,000 amps.

The charge box integrates charging, switching, sensing and protection functions and supports both the Combined Charging System and Megawatt Charging System standards.

Eaton’s Breaktor® circuit-protection technology was separately named a finalist for Battery Safety Technology of the Year.

Breaktor is a resettable device that combines switching, circuit protection and fault detection. Eaton says the technology provides a rapid response to high-current faults while reducing the complexity associated with conventional protection systems.

Additional information is available through Eaton’s electrified vehicle technology portfolio.

Q&A with Eaton’s eMobility Engineering Team

Eaton’s eMobility Engineering Team provided the following written responses about the Battery Configuration Switch, including its architecture, safety testing, vehicle integration, charging efficiency and future applications.

1. The Engineering Challenge

EV Charging Magazine: The Battery Configuration Switch enables 800V EVs to charge on existing 400V DC fast chargers. What was the most significant engineering challenge in developing a system capable of switching between 400V and 800V architectures while maintaining efficiency, safety, and performance?

Eaton eMobility Team: There were three primary engineering challenges in developing the Battery Configuration Switch:

  • Switching packs with slightly different voltages into parallel: The system must reliably connect two battery packs that may have small voltage differences into a parallel configuration without compromising safety or performance.
  • Achieving the required switching cycles: The switch must meet the high number of switching cycles demanded by OEMs over the vehicle’s lifetime.
  • Competitive cost at mass-production scale: All of the above must be delivered at a price point that is efficient for high-volume manufacturing while still maintaining low internal (system) resistance, efficiency, safety, and performance.

2. Safety and Reliability

EV Charging Magazine: Switching battery configurations under high-power charging conditions introduces additional technical complexity. What measures has Eaton implemented to ensure long-term reliability, electrical isolation, and safety throughout the vehicle’s lifecycle?

Eaton eMobility Team: For clarity, the BCS only performs the battery switching function before and after charging, when the battery management controller (BMC) or charge controller indicated it is safe to do so. That said, Eaton has implemented a formal reliability growth program for this project. As development progresses, multiple units are subjected to rigorous environmental and endurance testing, including:

  • Full high- and low-temperature environmental cycling (targeting ranges such as +85 °C to –40 °C)
  • Exposure to extreme vibration profiles that accelerate lifecycle damage accumulation
  • Extensive switching-cycle testing under representative conditions

A statistically meaningful number of parts are run through this complete test scheme to validate long-term reliability, electrical isolation, switching function, and safety over the full vehicle lifecycle.

The BCS has a mechanical interlock that makes it physically impossible to short circuit the battery during switching between 400V and 800V. This improves vehicle safety by eliminating a potentially unsafe condition and increases reliability.

3. Expanding Charging Access

EV Charging Magazine: Many automakers are transitioning to 800V vehicle architectures, while much of today’s public charging infrastructure remains based on 400V systems. How does the Battery Configuration Switch help bridge this gap, and what benefits does it provide to drivers in real-world charging scenarios?

Eaton eMobility Team: The Battery Configuration Switch exists precisely to solve this infrastructure mismatch. When OEMs place two 400V battery strings in series, they create an 800V supply that delivers the performance, payload, and charging-speed benefits of an 800V architecture. With the BCS inserted between those strings, the system can reconfigure the packs into two 400V packs. This allows the vehicle to charge on existing North American 400V DC fast-charging networks—including Tesla Superchargers and other CCS stations—while still operating as an 800V vehicle on the road. Drivers therefore gain access to the large installed base of 400V chargers without sacrificing the performance advantages of the higher-voltage architecture.

4. Eliminating Additional Hardware

EV Charging Magazine: The technology is designed to reduce the need for extra power-conversion hardware. Can you explain how the Battery Configuration Switch simplifies vehicle architecture compared with alternative approaches used to maintain compatibility between 800V vehicles and 400V chargers?

Eaton eMobility Team: Previously, OEMs achieved series/parallel reconfiguration by using three separate contactors whose control logic had to place them in the correct combination to safely split an 800V string into two 400V packs. Incorrect control sequencing could short the packs—a critical functional-safety failure mode. The BCS replaces that complex arrangement with a single rotary-style switch that, by design, can only place the packs in series or in parallel. It is mechanically incapable of creating an incorrect or hazardous configuration. The result is a simpler, more precise, and inherently safer architecture that eliminates the multi-contactor control risk, in addition to system bus bars, fasteners, and wire harnesses.

5. Integration into Vehicle Platforms

EV Charging Magazine: From an OEM perspective, how complex is the integration of the Battery Configuration Switch into an existing EV platform in terms of packaging, weight, software integration, and communication with the battery management system?

Eaton eMobility Team: Production platforms that can switch between 400V and 800V do not yet exist in volume; OEMs have been experimenting but are designing the capability into the next generation of vehicles. Integration of the BCS must occur at the battery-pack design stage because it requires a custom Battery Disconnect Unit (BDU) that houses the switch. Fortunately, the timing is ideal: OEMs are currently defining their next-generation packs with this architecture in mind. Eaton is developing the product for start-of-production (SOP) targeted at model years 2028–2029, aligning with those new platforms.

6. Charging Performance and Efficiency

EV Charging Magazine: How does battery reconfiguration affect charging performance, efficiency, battery balancing, and thermal management when an 800V vehicle is connected to a legacy 400V DC fast charger?

Eaton eMobility Team: The BCS is a latching device: it draws power only while actuating and requires no continuous power to hold either the series or parallel state. This makes it inherently efficient. Compared with a conventional three-contactor solution, the BCS offers two further efficiency advantages:

  • In any given configuration a three-contactor approach must keep two contactors energized; the BCS keeps none energized.
  • A three-contactor solution places the resistance of two contactors in series; the BCS presents the equivalent resistance of only a single contactor.

The net result is lower system resistance, reduced continuous power draw, and higher overall efficiency when the vehicle is charging on a 400V charger.

7. Commercial Vehicle Applications

EV Charging Magazine: Eaton was also recognized for its combined Megawatt Charging System (MCS) charge box and Battery Configuration Switch technology. How do the requirements differ between passenger vehicles and heavy-duty commercial applications, and what role could the Battery Configuration Switch play in future megawatt-scale charging ecosystems?

Eaton eMobility Team: While current BCS programs are focused on passenger-vehicle platforms, the same architecture can be applied to commercial vehicles. There are scenarios—particularly medium-duty trucks—where an OEM may wish to switch two packs between 400V and 800V to take advantage of the existing North American 400V charging network. The technology is adaptable to those use cases and could play a supporting role in future megawatt-scale charging ecosystems that still need to interface with mixed-voltage infrastructure.

8. Charger Infrastructure Evolution

EV Charging Magazine: As public charging networks gradually transition toward higher-voltage architectures, how do you see technologies such as the Battery Configuration Switch contributing to a smoother industry-wide migration without stranding existing infrastructure investments?

Eaton eMobility Team: Eaton views the BCS as a bridge technology. It allows 800V vehicles to utilize today’s 400V charging infrastructure while the industry gradually builds out true 800V charging networks. In the United States, Tesla alone operates nearly 40,000 Supercharger stalls—approximately 50% of all DC fast-charging ports. That installed base cannot be ignored. By enabling 800V vehicles to charge on these (and other) 400V systems, the BCS protects existing infrastructure investments and accelerates the adoption of higher-voltage vehicle architectures without waiting for a complete network upgrade. Markets such as China and Europe are moving more quickly toward 800V charging; the BCS lets North American OEMs participate in the same architectural trend while remaining compatible with the dominant local infrastructure.

9. Cost and Adoption

EV Charging Magazine: What impact can the Battery Configuration Switch have on vehicle cost, charging flexibility, and infrastructure utilization, and what factors will determine how quickly the technology is adopted by vehicle manufacturers?

Eaton eMobility Team: The BCS enables 800V architecture vehicles to charge on 400V chargers at very little additional vehicle cost. This improves charging flexibility for drivers and increases utilization of the large existing 400V infrastructure base. Adoption speed is governed primarily by OEM development cycles: the technology will appear in the next generation of battery packs and vehicles. Most OEMs are already working on 400V/800V reconfigurable architectures; therefore, the BCS is expected to ramp with those next-generation platforms (targeted SOP 2028–2029).

10. Looking Ahead

EV Charging Magazine: The Battery Configuration Switch has now been recognized with the EV Charging Innovation Excellence Award. Looking ahead, what areas of electrification and charging technology is Eaton prioritizing next, and where do you see the biggest opportunities for innovation over the next five years?

Eaton eMobility Team: Over the next five years Eaton is focused on developing low-cost, highly integrated solutions in close partnership with OEMs. The overarching industry goal is to drive battery-electric vehicles toward cost parity with internal-combustion vehicles at prevailing fuel prices. Technologies that enable higher levels of functional integration and lower system cost—while preserving safety, efficiency, and performance—represent the largest opportunity. The BCS itself is one example of this approach; future work will continue in the same direction of cost-down, integration, and enabling broader EV adoption.

BCS could ease the transition to higher-voltage EVs

Eaton is positioning the Battery Configuration Switch as a practical bridge between next-generation EV platforms and today’s charging infrastructure. Its broader relevance will depend on whether automakers adopt reconfigurable battery architectures as they develop future vehicle platforms.

The technology’s commercial impact will ultimately be determined by OEM integration, manufacturing cost and the results of Eaton’s ongoing validation program. No automaker or production vehicle has been announced, making a confirmed vehicle application the next significant milestone for the BCS.

Follow EV Charging Magazine on Google

Join Our Newsletter!

Unlock the world of EV charging! Subscribe to the EV Charging Magazine newsletter and receive exclusive content, early access to articles, and the latest updates on the rapidly evolving electric vehicle landscape.

We don’t spam! Read our privacy policy for more info.

Firas NAVARRO
Firas NAVARROhttps://evchargingmag.com/author/firas181
Firas NAVARRO is Owner & Publisher at EV Charging Magazine. With 12 years of expertise in EV charging technology, clean energy innovations, and battery development, he leads coverage of the latest industry news and trends. His focus includes in-depth market analysis of charging infrastructure and sustainable energy solutions, driving insights into the future of clean mobility. 🚗🔋🌐
DON'T MISS 🚨

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular 🔥

Advertisement

CATEGORIES 🗂️

RELATED ARTICLES 🔗

GoSun Launches $19,995 Electric Tractor With Optional Solar Charging

Manufactured by Moonrider in India, the compact battery-electric tractor is scheduled for North American availability in early 2027, targeting small farms, homesteads and landscaping...

STAY CONNECTED 📲

1,664FansLike
1,567FollowersFollow
1,258FollowersFollow